PayPayPlast offers a set of 600 uninsulated EN bootlace ferrules. The brass ferrules with electrolytic tinning are sorted into a 7-section case: 200 pcs for 0.5 / 0.75 mm², 200 pcs for 1.0 / 1.5 mm², and 100 pcs each for 2.5 mm² and 4.0 / 6.0 mm². They are crimped on with a crimper and rated up to +105 °C.

Specifications

What you get

• A ready assortment for board work — seven sizes from 0.5 to 6 mm² in one case.
• More of the sizes that run out first — 200 pcs each for 0.5 / 0.75 and 1.0 / 1.5 mm².
• A narrow terminal — with no collar the ferrule slips into tight-pitch terminal blocks.
• Tinned brass — electrolytic tinning covers the ferrule surface.
• Heat headroom — operation up to +105 °C.
• Quick size finding — each size has its own of the 7 case sections.

Who it is for

Panel installers terminating dozens of cores per call-out, service electricians with a tool case in the van, and anyone connecting breakers, sockets and busbars with stranded wire.

Who should look elsewhere

If you rely on collar colour to tell sizes apart, insulated ferrules are the better choice. The set has no sizes thinner than 0.5 mm² or thicker than 6 mm². You will need your own crimping tool.

Uses and compatibility

Terminating stranded wire before connecting it to breakers, sockets and busbars: signal lines and lighting — 0.5 / 0.75 mm², household wiring and sockets — 1.0 / 1.5 mm², water heaters and other heavy loads — 2.5 mm², main breakers and board equipment — 4.0 / 6.0 mm². A separate scenario is crowded terminal blocks with a tight pitch between contacts.

What is in the box

600 pcs of uninsulated ferrules and a 7-section storage case.

Questions and answers

How many ferrules of each size are there?

200 pcs each for 0.5 / 0.75 and 1.0 / 1.5 mm², and 100 pcs each for 2.5 mm² and 4.0 / 6.0 mm² — 600 pcs in total.

Which ferrule do I need for a water heater?

For heavier loads such as water heaters the set includes 2.5 mm² (AWG 14) ferrules.

Why is the brass tinned?

Electrolytic tinning covers the ferrule surface and protects the brass from oxidation.

Will a ferrule fit a cramped terminal block?

Yes, uninsulated ferrules are narrower than insulated ones, so they suit terminal blocks with a tight pitch between contacts.