Stainless steel staples, 0.8 mm thick, for outside corner plastic welding, supplied 100 pcs per pack. They are melted into the outer corners of bumpers, body kits, brackets and housings with a thermal stapler or plastic soldering iron to reinforce a crack. Suitable for ABS, PP, PE and rubber.

Specifications

What you get

• Shaped for outer corners — the staple wraps the edge of the part on both sides of the crack.
• Stiff where parts flex — 0.8 mm stainless steel.
• No rust inside the seam — stainless steel.
• Plenty for repeat jobs — 100 pcs per pack.
• Light to store — the pack weighs 0.070 kg.

Who it is for

Body shops and technicians who restore plastic bumpers and body kits, and owners of motorcycles and ATVs who repair housings themselves.

Who should skip it

These staples are not meant for inside corners or flat seams, because the shape follows an outer corner. Pick something else if you need a thickness other than 0.8 mm or do not have a thermal stapler or plastic soldering iron.

Use and compatibility

Repairing bumpers, body kits and car body panels, restoring brackets and mounting points, fixing housings of equipment, motorcycles and ATVs. Installed with thermal staplers and soldering irons for plastic; suitable materials are ABS, PP, PE plastics and rubber.

What is in the box

Staples, 100 pcs.

Questions and answers

Which corners are these staples for?

Outside corners: the staple wraps the edge of the part. Inside corners and flat cracks need a different staple shape.

What tool installs them?

A thermal stapler or a soldering iron for plastic.

Which materials can be repaired?

ABS, PP and PE plastics, as well as rubber.

Will the staple rust inside the part?

No. The staples are stainless steel, so corrosion inside the seam is not a concern.